Planned obsolescence

From Wikipedia, the free encyclopedia

Jump to navigationJump to search

For the book, see Planned Obsolescence (book).

Part of series on

Anti-consumerism

Theories and ideas[hide]

• Affluenza

• Alternative culture

• Autonomous building

• Billboard hacking

• Buddhist economics

• Buy Nothing Day

• Collaborative consumption

• Commodification

• Commodity fetishism

• Commune

• Compulsive buying disorder

• Conspicuous consumption

• Consumer capitalism

• Consumerism

• Criticism of advertising

• Culture jamming

• Degrowth

• Do it yourself

• DIY ethic

• Downshifting

• Ecovillage

• Ethical consumerism

• Freeganism

• Gift economy

• Green consumption

• Hyperconsumerism

• Local food

• Microgeneration

• Overconsumption

• Planned obsolescence

• Post-consumerism

• Post-growth

• Right to repair

• Simple living

• Slow Food

• Spectacle

• Steady-state economy

• Subvertising

• Sustainable consumer behaviour

• Sustainable consumption

Notable works[show]

Organizations and groups[show]

People[show]

Related social movements[show]

See also[show]

• v

• t

• e

Planned obsolescence, or built-in obsolescence, in industrial design and economics is a policy of planning or designing a product with an artificially limited useful life, so that it becomes obsolete (i.e., unfashionable, or no longer functional) after a certain period of time.^[1] The rationale behind this strategy is to generate long-term sales volume by reducing the time between repeat purchases (referred to as "shortening the replacement cycle").^[2]

Producers that pursue this strategy believe that the additional sales revenue it creates more than offsets the additional costs of research and development, and offsets the opportunity costs of repurposing an existing product line. In a competitive industry, this is a risky policy, because consumers may decide to buy from competitors instead if they notice the strategy.

Planned obsolescence tends to work best when a producer has at least an oligopoly.^[3] Before introducing a planned obsolescence, the producer has to know that the consumer is at least somewhat likely to buy a replacement from them. In these cases of planned obsolescence, there is an information asymmetry between the producer, who knows how long the product was designed to last, and the consumer, who does not. When a market becomes more competitive, product lifespans tend to increase.^[4][5] For example, when Japanese vehicles with longer lifespans entered the American market in the 1960s and 1970s, American carmakers were forced to respond by building more durable products.^[6]

Contents

• 1History and origins of the phrase

  • 1.1Alfred P. Sloan Jr.

  • 1.2Bernard London

  • 1.3Brooks Stevens

  • 1.4Volkswagen

  • 1.5Vance Packard's The Waste Makers

• 2Types

  • 2.1Contrived durability

  • 2.2Prevention of repairs

  • 2.3Perceived obsolescence

  • 2.4Systemic obsolescence

  • 2.5Programmed obsolescence

• 3Advantages and disadvantages

• 4Regulation

• 5Critics and supporters

• 6In software

• 7In academia

• 8In Consumer Electronics

• 92010s

• 10See also

• 11References

• 12Further reading

History and origins of the phrase[edit]

The 1923 Chevrolet is cited as one of the earliest examples of annual facelifts in the car industry, because it had a restyled body covering what essentially was nine-year-old technology.^[7]

Alfred P. Sloan Jr.[edit]

In the United States, automotive design reached a turning point in 1924 when the American national automobile market began reaching saturation. To maintain unit sales, General Motors head Alfred P. Sloan Jr. suggested annual model-year design changes to convince car owners that they needed to buy a new replacement each year, an idea borrowed from the bicycle industry, though the concept is often misattributed to Sloan.^[8] Critics called his strategy "planned obsolescence". Sloan preferred the term "dynamic obsolescence".^[9]

This strategy had far-reaching effects on the auto business, the field of product design, and eventually the American economy. The smaller players could not maintain the pace and expense of yearly re-styling. Henry Ford did not like the constant stream of model-year changes because he clung to an engineer's notions of simplicity, economies of scale, and design integrity. GM surpassed Ford's sales in 1931 and became the dominant company in the industry thereafter. The frequent design changes also made it necessary to use a body-on-frame rather than the lighter, but less easy to modify, unibody design used by most European automakers.

Bernard London[edit]

Ending the Depression Through Planned Obsolescence, by Bernard London, 1932

The origins of phrase planned obsolescence go back at least as far as 1932 with Bernard London's pamphlet Ending the Depression Through Planned Obsolescence.^[10] The essence of London's plan would have the government impose a legal obsolescence on consumer articles, to stimulate and perpetuate consumption.

Brooks Stevens[edit]

However, the phrase was first popularized in 1954 by Brooks Stevens, an American industrial designer. Stevens was due to give a talk at an advertising conference in Minneapolis in 1954. Without giving it much thought, he used the term as the title of his talk. From that point on, "planned obsolescence" became Stevens' catchphrase. By his definition, planned obsolescence was "Instilling in the buyer the desire to own something a little newer, a little better, a little sooner than is necessary."

Volkswagen[edit]

The phrase was quickly taken up by others, but Stevens' definition was challenged. By the late 1950s, planned obsolescence had become a commonly used term for products designed to break easily or to quickly go out of style. In fact, the concept was so widely recognized that in 1959 Volkswagen mocked it in an advertising campaign. While acknowledging the widespread use of planned obsolescence among automobile manufacturers, Volkswagen pitched itself as an alternative. "We do not believe in planned obsolescence", the ads suggested. "We don't change a car for the sake of change."^[11] In the famous Volkswagen advertising campaign by Doyle Dane Bernbach, one advert showed an almost blank page with the strapline "No point in showing the 1962 Volkswagen, it still looks the same".

Vance Packard's The Waste Makers[edit]

In 1960, cultural critic Vance Packard published The Waste Makers, promoted as an exposé of "the systematic attempt of business to make us wasteful, debt-ridden, permanently discontented individuals". Packard divided planned obsolescence into two sub categories:

• obsolescence of desirability; and

• obsolescence of function.

"Obsolescence of desirability", a.k.a. "psychological obsolescence", referred to marketers' attempts to wear out a product in the owner's mind. Packard quoted industrial designer George Nelson, who wrote: "Design... is an attempt to make a contribution through change. When no contribution is made or can be made, the only process available for giving the illusion of change is 'styling!'"

Types[edit]

Contrived durability[edit]

Contrived durability is a strategy of shortening the product lifetime before it is released onto the market, by designing it to deteriorate quickly.^[3] The design of all consumer products includes an expected average lifetime permeating all stages of development. Thus, it must be decided early in the design of a complex product how long it is designed to last so that each component can be made to those specifications. Since all matter is subject to entropy, it is impossible for any designed object to retain its full function forever; all products will ultimately break down, no matter what steps are taken. Limited lifespan is only a sign of planned obsolescence if the lifespan of the product is made artificially short by design.

The strategy of contrived durability is generally not prohibited by law, and manufacturers are free to set the durability level of their products.^[3]

A possible method of limiting a product's durability is to use inferior materials in critical areas, or suboptimal component layouts which cause excessive wear. Using soft metal in screws and cheap plastic instead of metal in stress-bearing components will increase the speed at which a product will become inoperable through normal usage and make it prone to breakage from even minor forms of abnormal usage. For example, small, brittle plastic gears in toys are extremely prone to damage if the toy is played with roughly, which can easily destroy key functions of the toy and force the purchase of a replacement. The short life expectancy of smartphones and other handheld electronics is a result of constant usage, fragile batteries, and the ability to easily damage them.^[12]

Prevention of repairs[edit]

Pentalobe screws used in an iPhone 6S. Critics have argued that Apple's use of pentalobe screws in their newer devices is an attempt to prevent the consumer from repairing the device themselves.

The ultimate examples of such design are single-use versions of traditionally durable goods, such as disposable cameras, where the customer must purchase an entire new product after using them a single time. Such products are often designed to be impossible to service; for example, a cheap "throwaway" digital watch may have a casing which is simply sealed in the factory, with no designed ability for the user to access the interior without destroying the watch entirely.^{[citation needed]} Manufacturers may make replacement parts either unavailable or so expensive that it makes the product uneconomic to repair, for example inkjet printers made by Canon incorporate a print head which eventually fails, however the high cost of a replacement forces the owner to scrap the entire device.

Other products may also contain design features meant to frustrate repairs, such as Apple's "tamper-resistant" pentalobe screws that cannot easily be removed with common consumer tools.^[13] Front loading washing machinesoften have the drum bearing - a critical and wear-prone mechanical component - permanently molded into the wash tub, or even have a sealed outer tub, making it impossible to renew the bearings without replacing the entire tub. The cost of this repair may exceed the residual value of the appliance, forcing it to be scrapped.^[14][15]

According to Kyle Wiens, co-founder of an online repair community, a possible goal for such design is to make the cost of repairs comparable to the replacement cost, or to prevent any form of servicing of the product at all. In 2012, Toshiba was criticized for issuing cease-and-desist letters to the owner of a website that hosted its copyrighted repair manuals, to the detriment of the independent and home repair market.^[16]

Some products contain batteries that are not user-replaceable after they have worn down. While such a design can help make the device thinner, it can also make it difficult to replace the battery without sending the entire device away for repairs or purchasing a replacement.^[17]

Perceived obsolescence[edit]

Obsolescence of desirability or stylistic obsolescence occurs when designers change the styling of products so customers will purchase products more frequently due to the decrease in the perceived desirability of unfashionable items.

Many products are primarily desirable for aesthetic rather than functional reasons. An obvious example of such a product is clothing. Such products experience a cycle of desirability referred to as a "fashion cycle". By continually introducing new aesthetics, and retargeting or discontinuing older designs, a manufacturer can "ride the fashion cycle", allowing for constant sales despite the original products remaining fully functional. Sneakers are popular fashion industry where this is prevalent - Nike's Air Max line of running shoes is a prime example where a single model of shoe is often produced for years, but the color and material combination ("colorway") is changed every few months, or different colorways are offered in different markets. This has the upshot of ensuring constant demand for the product, even though it remains fundamentally the same.

To a more limited extent this is also true of some consumer electronic products, where manufacturers will release slightly updated products at regular intervals and emphasize their value as status symbols.

Systemic obsolescence[edit]

Planned systemic obsolescence is the deliberate attempt to make a product obsolete by altering the system in which it is used in such a way as to make its continued use difficult. Common examples of planned systemic obsolescence include not accommodating forward compatibility in software, or routinely changing screws or fasteners so that they cannot easily be operated on with existing tools.

This approach was employed by Samsung in the case of the Samsung Galaxy Note 7. This device was recalled due to battery defects that caused several units to catch fire or explode. There are several holdouts, however, with people refusing to send the device back and these constituted 4 percent or 1.9 million total devices sold in the United States.^[18][19] To address this and avoid more cases of overheating devices, the South Korean company began rolling out software updates for the Note 7 that throttled its functionalities. The final update landed on December 19, 2016, with an update that prevented the batteries from charging, effectively bricking the phones.^[20]

Programmed obsolescence[edit]

In some cases, notification may be combined with the deliberate disabling of a product to prevent it from working, thus requiring the buyer to purchase a replacement. For example, inkjet printer manufacturers employ smart chips in their ink cartridges to prevent them from being used after a certain threshold (number of pages, time, etc.), even though the cartridge may still contain usable ink or could be refilled (with ink toners, up to 50 percent of the toner cartridge is often still full^[21]). This constitutes "programmed obsolescence", in that there is no random component contributing to the decline in function.

In the Jackie Blennis v. HP class action suit, it was claimed that Hewlett Packard designed certain inkjet printers and cartridges to shut down on an undisclosed expiration date, and at this point consumers were prevented from using the ink that remained in the expired cartridge. HP denied these claims, but agreed to discontinue the use of certain messages, and to make certain changes to the disclosures on its website and packaging, as well as compensating affected consumers with a total credit of up to $5,000,000 for future purchases from HP.^[22]

There are some workarounds for users, for instance, that will more than double the life of the printer that has stopped with a message to replace the imaging drum.^[23]

Advantages and disadvantages[edit]

Further information: Waste hierarchy

Estimates of planned obsolescence can influence a company's decisions about product engineering. Therefore, the company can use the least expensive components that satisfy product lifetime projections.

Also, for industries, planned obsolescence stimulates demand by encouraging purchasers/putting them under pressure to buy sooner if they still want a functioning product. These products can be bought from the same manufacturer (a replacement part or a newer model), or from a competitor who might also rely on planned obsolescence. Especially in developed countries (where many industries already face a saturated market), this technique is often necessary for producers to maintain their level of revenue.

While planned obsolescence is appealing to producers, it can also do significant harm to the society in the form of negative externalities. Continuously replacing products, rather than repairing them, creates more waste and pollution, uses more natural resources, and results in more consumer spending. Planned obsolescence can thus have a negative impact on the environment in aggregate. Even when planned obsolescence might help to save scarce resources per unit produced, it tends to increase output in aggregate, since due to laws of supply and demand, decreases in cost and price will eventually result in increases in demand and consumption. However, the negative environmental impacts of planned obsolescence are dependent also on the process of production,^[24] as well as technical details pertaining to product disposal. Products that are difficult to disassemble can be very difficult to recycle properly.

There is also the potential backlash of consumers who learn that the manufacturer invested money to make the product obsolete faster; such consumers might turn to a producer (if any exists) that offers a more durable alternative.

Regulation[edit]

In 2015, as part of a larger movement against planned obsolescence across the European Union, France has passed legislation requiring that appliance manufacturers and vendors declare the intended product lifespans, and to inform consumers how long spare parts for a given product will be produced. From 2016, appliance manufacturers are required to repair or replace, free of charge, any defective product within two years from its original purchase date. This effectively creates a mandatory two-year warranty.^[25]

Critics and supporters[edit]

Shortening the replacement cycle has critics and supporters. Philip Kotler argues that: "Much so-called planned obsolescence is the working of the competitive and technological forces in a free society—forces that lead to ever-improving goods and services."^[26]

Critics such as Vance Packard claim the process is wasteful and exploits customers. With psychological obsolescence, resources are used up making changes, often cosmetic changes, that are not of great value to the customer. Miles Park advocates new and collaborative approaches between the designer and the consumer to challenge obsolescence in fast-moving sectors such as consumer electronics.^[27] Some people, such as Ronny Balcaen, have proposed to create a new label to counter the diminishing quality of products due to the planned obsolescence technique.^[21]

In software[edit]

Software companies sometimes deliberately drop support for older technologies as a calculated attempt to force users to purchase new products to replace those made obsolete.^[28] Most proprietary software will ultimately reach an end-of-life point - usually because the cost of support exceeds the revenue generated by supporting the old version - at which the supplier will cease updates and support. As free software and open source software can always be updated and maintained by somebody else, the user is not at the sole mercy of a proprietary vendor.^[29] Software which is abandoned by the manufacturer with regard to manufacturer support is sometimes called abandonware.

In academia[edit]

Russell Jacoby, writing in the 1970s, observes that intellectual production has succumbed to the same pattern of planned obsolescence used by manufacturing enterprises to generate ever-renewed demand for their products.

The application of planned obsolescence to thought itself has the same merit as its application to consumer goods; the new is not only shoddier than the old, it fuels an obsolete social system that staves off its replacement by manufacturing the illusion that it is perpetually new.^[30]

Camille Paglia characterizes contemporary academic discourse influenced by French theorists such as Lacan, Derrida, and Foucault as the academic equivalent of name brand consumerism. "Lacan, Derrida, and Foucault," she says, "are the academic equivalents of BMW, Rolex, and Cuisinart."^[31] Under the inspiration of the latest academic fashions, academic planned obsolescence is to manufacture content with little merit for the same reason fashion designers come out with new fashions.